Water & Waste Water Engineering · JKSSB Field Assistant 2026 (Set A) · Last updated:

View the full solved paper: JKSSB Field Assistant 2026 (Set A)

Arrange the following biological treatment configurations in the order of increasing level of process control / sophistication (simplest first):

  • I. Wastewater stabilization ponds
  • II. Trickling filter
  • III. Conventional activated sludge process
  • IV. Sequencing Batch Reactor (SBR)

Choose the correct sequence:

  1. A. I-II-III-IV (Correct answer)
  2. B. II-I-III-IV
  3. C. I-III-II-IV
  4. D. IV-III-II-I

Correct Answer

Option A — I-II-III-IV

Detailed Solution & Explanation

Key Points

  • Ranking the configurations by how much control and mechanical intervention each demands:
    • I. Wastewater stabilization ponds — simplest. Treatment is by natural algal-bacterial symbiosis in shallow basins, with no mechanical equipment and minimal operator attention.
    • II. Trickling filter — a fixed bed with a rotating distributor, needing modest power and maintenance.
    • III. Conventional activated sludge — continuous aeration, sludge return, and active control of MLSS, F/M ratio and sludge age.
    • IV. The most instrumented and controlled of the four.
  • Increasing sophistication buys smaller footprint and better effluent at the cost of energy, skilled operation and reliability risk.

Additional Information

  • The trade-off is decisive in practice. Stabilization ponds need very large land areas — detention of 20-30 days is common — but tolerate neglect, which is why they suit small towns without trained staff.
  • Activated sludge occupies a fraction of that land but fails quickly if aeration stops or sludge return is mismanaged, and it needs continuous power.
  • Pond systems are usually built in series as anaerobic → facultative → maturation ponds, the last providing pathogen die-off through sunlight and long detention.
  • Choosing between these is an economic and institutional judgement as much as a technical one, and CPHEEO's manual advises selecting by land availability, power reliability and operator capability, not by effluent quality alone.

Topics covered: Water Engineering