Water & Waste Water Engineering · JKSSB Field Assistant 2026 (Set A) · Last updated:

View the full solved paper: JKSSB Field Assistant 2026 (Set A)

Arrange the following steps in a conventional biological wastewater treatment train in correct order (flow direction):

  • I. Secondary clarifier
  • II. Aeration tank
  • III. Primary clarifier
  • IV. Coagulation flocculation settling (if included)

Choose the correct sequence:

  1. A. IV-III-II-I
  2. B. III-IV-II-I (Correct answer)
  3. C. IV-II-I-III
  4. D. III-II-I-IV

Correct Answer

Option B — III-IV-II-I

Detailed Solution & Explanation

Key Points

  • The sequence follows the direction of flow through the works:
    • III. Primary clarifier first, removing settleable solids and a share of the BOD by plain gravity settling.
    • IV. Coagulation, flocculation and settling, where included, as a chemical enhancement of solids and phosphorus removal ahead of the biological stage.
    • II. Aeration tank, where micro-organisms oxidise the remaining dissolved and colloidal organic matter.
    • I. Secondary clarifier last, separating the biomass grown in the aeration tank from the treated effluent.
  • The two fixed relationships are that primary settling precedes biological treatment, and that the secondary clarifier must follow aeration, since it exists to remove the sludge that aeration produces.

Additional Information

  • A full conventional train runs screening → grit removal → primary clarifier → biological reactor → secondary clarifier → disinfection → sludge treatment, and the preliminary units exist to protect the pumps and downstream tanks from rags and grit.
  • Primary settling alone typically removes about 50-60% of suspended solids and 30-35% of BOD; secondary treatment lifts overall BOD removal to 85-95%.
  • Chemical coagulation is not universal — it appears where phosphorus removal or enhanced primary treatment is required, which is why the question marks it "if included".
  • Ordering questions of this type are best answered by locking the first and last units, since only one option usually satisfies both.

Topics covered: Water Engineering