Water & Waste Water Engineering · JKSSB Field Assistant 2026 (Set A) · Last updated:
View the full solved paper: JKSSB Field Assistant 2026 (Set A)
Which of the following unit operations removes fine suspended solids and colloidal particles by chemical destabilization and formation of flocs?
- A. Sedimentation
- B. Filtration
- C. Coagulation and flocculation (Correct answer)
- D. Disinfection
Correct Answer
Option C — Coagulation and flocculation
Detailed Solution & Explanation
Key Points
- Fine suspended solids and colloidal particles will not settle on their own. Colloids carry like negative surface charges that keep them mutually repelled and permanently in suspension.
- Coagulation adds a chemical — commonly alum, $\text{Al}_2(\text{SO}_4)_3$ — whose trivalent cations neutralise that charge, destabilising the colloid. This is a rapid step requiring flash mixing.
- Flocculation follows: gentle, slow stirring brings the destabilised particles into contact so they agglomerate into larger, settleable flocs.
- Sedimentation alone cannot remove colloids, filtration alone would clog, and disinfection kills pathogens without addressing turbidity.
Additional Information
- The sequence in a conventional waterworks is coagulation → flocculation → sedimentation → filtration → disinfection, and each step exists because the one before it cannot do that job.
- The two mixing regimes are deliberately opposite: rapid mixing for seconds to disperse the coagulant, then slow mixing for 20-40 minutes to grow floc without shearing it apart.
- Alum works only within a pH range of roughly 6.5-8.5; outside it, lime or soda ash is dosed to correct pH. Ferric chloride and ferric sulphate tolerate a wider range.
- The optimum dose is determined experimentally by the jar test, still the standard bench procedure in Indian water treatment plants.
Topics covered: Water Engineering